Electric tunnel kiln

Dacromet is a new surface treatment technology. Compared with traditional plating process, Dacromet is a kind of "green plating". Its advantages include the following points:
1. ultra strong corrosion resistance: the thickness of the dacros film is only 4-8 m, but its antirust effect is more than 7-10 times the traditional galvanizing, hot-dip galvanizing or coating coating. The standard parts and pipe fittings processed by Dacromet process did not appear red rust after salt spray test for more than 1200h.
2. No hydrogen embrittlement: Dacromet treatment process determines that there is no hydrogen embrittlement Dacromet, so Dacromet is very suitable for the coating of stressed parts.
3. high heat resistance: Dacromet can withstand high temperature corrosion and heat resistance can reach above 300 C. The traditional galvanizing process has been scrapped when the temperature reaches 100 degrees.
4. the binding force and recoating performance are good: the dacrom coating has a good bonding force with the metal matrix, and has strong adhesion to the other additional coatings. The treated parts are easy to paint and paint, and the binding force to the organic coating is even more than the phosphating film.
5. good permeability: because of the electrostatic shielding effect, the deep holes, slit of the workpiece, the inner wall of the pipe and other parts of the pipe are difficult to electroplating zinc, so the above parts of the workpiece can not be protected by electroplating. Dacromet can enter the parts of the workpiece to form the Dacromet coating.
6. no pollution and pollution: dacroa in the process of production and processing and the whole process of coating, will not produce pollution to the environment waste waste gas, no waste treatment, reduce the cost of treatment.

Infrared radiation is a kind of invisible electrothermal radiation. Its wavelength range from 0.7-1000n (micron), between visible light and microwave, is called infrared, and because it is a kind of radiation wave, it is often called infrared radiation; it has strong penetrating power, it can reach the inner layer and surface simultaneously and dry at the same time. It can save about 30% electricity.
In recent years, our factory has been specially designed and manufactured for the field certification of the drying and heat treatment of mineral products with the domestic refractory research and Design Institute and the large and medium-sized refractory industrial and mining enterprises in recent years. It is mainly suitable for the dehydration and drying of different refractory products and the curing and decomposition of non metal articles containing chemical components. The products made of minerals, semi finished drying and heat treatment have the advantages of strong decomposition penetration, fast drying and heat treatment.
The product is automatically controlled by PID. The automatic heating up, automatic constant temperature and automatic wetting can not only meet the production process requirements, but also improve the working efficiency, reduce the labor intensity and greatly reduce the energy consumption and environmental pollution. The product has the precision of control temperature, uniform uniformity, low temperature difference and stable performance. It has the characteristics of convenient and flexible operation, safe and reliable.