car Lining Furnaces

Automotive interior decoration furnace is widely used in automotive interior parts manufacturing enterprises. It is the roof of PU composite board, PET plate, EVA sheet, ABS, rubber, PP wood powder board, PP board, the roof of the trunk, the inside of the door, the carpets of the car, the heating compound, and the softening and setting. It is essential for the automobile interior decoration enterprise. Production equipment.

The mesh belt furnace of automobile interior decoration is highly automated and stable and reliable. It can fully feed, heat, pressurize and discharge. The equipment is used as the main material of the steel and stainless steel plate. The heating element made of high quality high frequency and high temperature embedded ceramic heating tile is made of high quality high frequency and high temperature embedded ceramic heating tile. The heating element is heated by the upper and lower frame, and the radiation distance of the upper and lower heaters can be adjusted, and the heating element is added through the adjusting energy. The radiant heating effect of the hot work piece is in the best working result. The upper and lower heating bracket is driven by rollers to facilitate maintenance and replacement of heaters.

The automobile interior decoration mesh belt furnace has a high degree of mechanical and electrical integration. The electric control system adopts PLC programmable control, which can control the single heating system of the equipment separately. The heating furnace is matched with the temperature control cabinet. The temperature can be adjusted within 0 to 400 degrees, and the heating zone can be separated or heated at the same time. The upper and lower two levels are the upper twelve districts and the lower nine districts are temperature controlled. Each zone can cut off the power supply and sound and light alarm.

Since its establishment, Jiangsu Hua Rongda Thermal Technology Co., Ltd. has been committed to the research, design, manufacture and sale of special heating equipment for auto parts. Since its establishment, our company has absorbed the advanced technology and experience at home and abroad, combined with the actual needs of customers, and has been constantly forging ahead and innovating. To become a high quality supplier for many enterprises.

Introduction of oven products for automotive interior accessories:

The production line of automobile interior decoration oven is composed of feeding platform (feeding section), radiant heating furnace (heating section), molding press (forming section), automatic discharging device (lower part), conveying clamping system and other auxiliary devices.

Automotive interior decoration furnace is widely used in automotive interior parts manufacturing enterprises. It is the roof of PU composite board, PET plate, EVA sheet, ABS, rubber, PP wood powder board, PP board, the roof of the trunk, the inside of the door, the carpets of the car, the heating compound, and the softening and setting. It is essential for the automobile interior decoration enterprise. Production equipment.

The mesh belt furnace of automobile interior decoration is highly automated and stable and reliable. It can fully feed, heat, pressurize and discharge. The equipment is used as the main material of the steel and stainless steel plate. The heating element made of high quality high frequency and high temperature embedded ceramic heating tile is made of high quality high frequency and high temperature embedded ceramic heating tile. The heating element is heated by the upper and lower frame, and the radiation distance of the upper and lower heaters can be adjusted, and the heating element is added through the adjusting energy. The radiant heating effect of the hot work piece is in the best working result. The upper and lower heating bracket is driven by rollers to facilitate maintenance and replacement of heaters.

The automobile interior decoration mesh belt furnace has a high degree of mechanical and electrical integration. The electric control system adopts PLC programmable control, which can control the single heating system of the equipment separately. The heating furnace is matched with the temperature control cabinet. The temperature can be adjusted within 0 to 400 degrees, and the heating zone can be separated or heated at the same time. The upper and lower two levels are the upper twelve districts and the lower nine districts are temperature controlled. Each zone can cut off the power supply and sound and light alarm.

Since its establishment, Jiangsu Hua Rongda Thermal Technology Co., Ltd. has been committed to the research, design, manufacture and sale of special heating equipment for auto parts. Since its establishment, our company has absorbed the advanced technology and experience at home and abroad, combined with the actual needs of customers, and has been constantly forging ahead and innovating. To become a high quality supplier for many enterprises.

Introduction of oven products for automotive interior accessories:

The production line of automobile interior decoration oven is composed of feeding platform (feeding section), radiant heating furnace (heating section), molding press (forming section), automatic discharging device (lower part), conveying clamping system and other auxiliary devices.

The feeding platform is a worktable with adjustable width, which can hold fabric and stepless.

The heating section of the oven of automobile interior is heated by far infrared heating, PID temperature control, the heating temperature and time can be set by itself according to the process requirements. The heating plate can be adjusted according to the width of the material, the temperature can not be too high to prevent the scorch and shell. Generally, the material is soft and molten with the back coating material. The interior heating oven is heated on one side, mainly for fabric heating. The side heating is heated by upper and lower sides, mainly by auxiliary substrate heating. After the two materials are heated, the auxiliary material is automatically transferred to the positive heating plate, and the material is combined with the fabric. Then it is sent to the molding area. The press is pressed down and the mould is closed, and the pressure and molding time are controlled. The pressure is 7-15MPA, molding time is 40-90 seconds, and the cooling mode is taken out. It is transmitted by linear guide and rotary fixture. The upper part of the heating plate can be equipped with an automatic timing exhaust device to ensure clean air in the workshop.

The commonly used carpet interior fabric has pet needling carpet fabric and PA tufted carpet fabric. The pet needle punched carpet is widely used in various ordinary car carpets, suitcase carpets, wheel cover decorative plates, and so on. The tufted carpet fabric is meticulously textured and has a good appearance and texture for middle and high grade car interior accessories.
The use of steel and stainless steel plate as the main material of the automobile interior decoration oven production line has high automation, stable and reliable operation, and can be fully automatic, heating, pressurizing and discharging.

Since its establishment, Jiangsu Hua Rongda Thermal Technology Co., Ltd. has been committed to the research, design, manufacture and sale of special heating equipment for auto parts. Since its establishment, our company has absorbed the advanced technology and experience at home and abroad, combined with the actual needs of customers, and has been constantly forging ahead and innovating. To become a high quality supplier for many enterprises.

The feeding platform is a worktable with adjustable width, which can hold fabric and stepless.

The heating section of the oven of automobile interior is heated by far infrared heating, PID temperature control, the heating temperature and time can be set by itself according to the process requirements. The heating plate can be adjusted according to the width of the material, the temperature can not be too high to prevent the scorch and shell. Generally, the material is soft and molten with the back coating material. The interior heating oven is heated on one side, mainly for fabric heating. The side heating is heated by upper and lower sides, mainly by auxiliary substrate heating. After the two materials are heated, the auxiliary material is automatically transferred to the positive heating plate, and the material is combined with the fabric. Then it is sent to the molding area. The press is pressed down and the mould is closed, and the pressure and molding time are controlled. The pressure is 7-15MPA, molding time is 40-90 seconds, and the cooling mode is taken out. It is transmitted by linear guide and rotary fixture. The upper part of the heating plate can be equipped with an automatic timing exhaust device to ensure clean air in the workshop.

The commonly used carpet interior fabric has pet needling carpet fabric and PA tufted carpet fabric. The pet needle punched carpet is widely used in various ordinary car carpets, suitcase carpets, wheel cover decorative plates, and so on. The tufted carpet fabric is meticulously textured and has a good appearance and texture for middle and high grade car interior accessories.
The use of steel and stainless steel plate as the main material of the automobile interior decoration oven production line has high automation, stable and reliable operation, and can be fully automatic, heating, pressurizing and discharging.

Since its establishment, Jiangsu Hua Rongda Thermal Technology Co., Ltd. has been committed to the research, design, manufacture and sale of special heating equipment for auto parts. Since its establishment, our company has absorbed the advanced technology and experience at home and abroad, combined with the actual needs of customers, and has been constantly forging ahead and innovating. To become a high quality supplier for many enterprises.